Netcom Connect / Park operator guide
Friday night.
Full park.
The last family checks in. Rain starts on the caravan roof. Along the same row, dozens of guests settle down to watch television. This is the evening to design your holiday park WiFi around.
Try the bandwidth calculatorCoverage on the ground
Start at the sofa in the last caravan
A speed test beside the reception router tells you how the park performs in one room. A guest in a static caravan at the far end of the site uses a different route. Their phone talks to a local access point. The access point sends traffic across the park. Only then does the traffic reach your broadband line. A fault or bottleneck at any stage affects the guest.
Take a park map on your first walk. Mark the pitch, room, device and time behind each complaint. Try the same phone outside the door, on the sofa and in the back bedroom. Then try a second home on the same row. A pattern across several homes gives your engineer a different starting point from a problem beside one television.
Static caravans and lodges
Metal cladding and foil-backed insulation weaken an outdoor signal indoors. Where guests expect private WiFi throughout a holiday home, bring a connection into the unit and choose an indoor access point position. Test the television with the doors closed.
Touring pitches and campsites
Walk the pitch rows with a guest-sized device. Check both sides of the amenity block and repeat a test when touring caravans occupy the pitches. Record where you intend to offer outdoor coverage and what guests should expect inside their own vehicles.
Reception and shared spaces
Check the arrivals desk during changeover, the clubhouse during evening service and the terrace when families gather. A busy room needs enough radio capacity for many devices in a small area. An empty-room signal reading answers only the coverage question.
Peak-season bandwidth
Estimate bandwidth for a full holiday park
Count simultaneous activities. A hundred pitches do not automatically mean a hundred streams. Equally, one occupied lodge might have two televisions playing different films.
For a first estimate, Netflix recommends 5 Mbps for a stable Full HD stream and 15 Mbps for 4K. Forty Full HD streams therefore use about 200 Mbps of download capacity in this example. The same forty screens at 4K bring the estimate to 600 Mbps. Both figures cover video alone. Netflix internet speed guidance.
Planning tool
Evening bandwidth calculator
Compare simultaneous streams with the download capacity available to guests. Use an evening measurement if you have one.
Estimated video download
200 Mbps
40 streams × 5 Mbps = 200 Mbps.
300 Mbps remains from the example 500 Mbps guest capacity.
The calculator leaves video calls, software updates, cloud backups and staff use out of the sum. Measure upload speed separately. A park might handle several films while a guest sending a large video struggles. Ask your provider for busy-hour measurements in both directions and compare them with a quiet morning on the same equipment.
Installation choices
Choose a route for each part of the park
Start with the incoming broadband, then work out how to carry the connection to each area. Engineers call this middle part of the journey the backhaul. The two drawings show where the signal travels.
Cross an occupied row by radio
A pair of directional radios links two fixed points. One might sit on a reception mast and the other on a building beside a lodge row. Local cabling then feeds the homes or outdoor access points. Guests join the local WiFi with their usual devices.
Check on site. Look along the proposed path in both directions. Allow clearance around the beam and consider summer leaf growth. Record mounting positions, access for maintenance and power at the far end.
Lay fibre during planned works
A new road, resurfacing job or lodge development gives you a chance to put ducting in the ground. Fibre carries traffic between cabinets along the cable route. A powered switch at the receiving end serves the local homes. Trees between the buildings do not obstruct the cable.
Check on site. Mark existing ducts, chambers, road crossings and future pitches. Ask who supplies the duct, reinstates the surface, tests the fibre and hands over the route drawings.
Use both where the ground changes
Consider a park with an established touring field and a new lodge extension. A clear radio path might reach the field without closing the access road. The extension might already have an open trench. Ask for each route on the same plan, with the homes sharing each link marked clearly. A quoted radio link speed describes one part of the system. The capacity available inside a lodge also depends on the upstream line, other users and indoor coverage.
From our work in Norfolk
What Forest Park taught us about support
At Forest Park, Netcom used a central rack and several wireless links to reach different areas. We also built a monitor to check individual radios and access points. One 24-hour snapshot in our case study showed 157 devices online and none offline.
For reception, the useful question is how far a fault extends. If a whole row loses service, the engineer has a reason to check its shared link and power first. If neighbouring homes still work, the engineer has a reason to start inside the affected home. A map linking each device to its row makes a support call much more precise.
Read the Forest Park case studyRunning the service
Give reception a clear answer at check-in
A guest wants three things from the welcome pack. Which network should I join? Where should it work? Who do I contact if I lose the connection?
Decide who looks after owners
Under a park-managed arrangement, your park sets owner charges and handles the relationship. You choose the installation and technical support you need from Netcom. Under a Netcom-managed arrangement, your park funds the agreed infrastructure and Netcom handles the owner sign-ups, billing and support included in your proposal.
Spell out who books an installation when a holiday home changes hands. Agree how to handle a vacant pitch, a seasonal closure and a lodge owner who rents to several families in succession. These decisions affect both the quote and the workload at reception.
Keep guest and staff services separate
Guests need internet access. Reception needs bookings, printers and card terminals. An engineer should put guest devices on a separate network and check the rules between networks. Include a practical handover test. Join as a guest, open a public website and confirm the guest device cannot reach the office printer.
If guests cast to a television, test the pairing inside one lodge and check which screens appear in the next. Ask the installer how each household’s devices find each other while keeping the neighbours’ equipment private.
Before you request a quote
Put the same brief in every installer’s hands
A price per pitch leaves plenty of room for different assumptions. A quote for outdoor coverage around a row does a different job from a quote for indoor coverage in every home. Use these five entries to compare holiday park WiFi installation costs on equal terms.
- Coverage map
- Mark each lodge, pitch row and shared building. Name the rooms and outdoor spaces where you expect service. Include future phases and any areas you intend to leave out.
- Peak demand
- Give your busiest occupancy, the mix of owners and touring guests, and the busiest hours. Supply recent wired speed tests with times, plus any traffic graphs from your existing provider.
- Installation costs
- Separate civils, fibre, radios, cabinets, power and in-home equipment. Ask for the cost of adding one more lodge after the first phase. Include access equipment and surface reinstatement where relevant.
- Acceptance tests
- Choose sample homes and pitch positions together. Record a wired baseline, then test WiFi indoors and outdoors using an ordinary guest device. Agree how you will repeat the checks during the first busy weekend.
- Ongoing support
- List recurring broadband, licences, monitoring and maintenance charges. Agree who takes the first call, support hours, response targets and the process if a visit or replacement unit is needed.
If you already have a system, add the equipment list, circuit details and ownership records. Confirm who controls the configuration and which hardware belongs to the outgoing supplier. Plan a trial on one row while the rest of the park continues to use its existing service.
Park owners’ questions
Holiday park WiFi FAQs
Why does caravan WiFi show full bars and still buffer?
The bars describe the radio signal between your device and the access point. They say little about free capacity on the shared radio channel, the link across the park or the incoming broadband. Compare the affected caravan with another home on the same row, then compare both with a wired test at reception at the same time.
Would a faster broadband line solve evening slowdowns?
Look at demand on the incoming line during the slowdown. If the line reaches capacity and several rows slow together, an upgrade is worth pricing. If the office connection stays fast while one row slows, investigate the route to the row and the local WiFi before committing to a new circuit.
What if our rural park has limited fibre broadband?
Check full fibre and leased-line availability at the actual site address. Where fixed-line options fall short, compare fixed wireless, mobile or satellite at the proposed installation point. Test at busy times and include upload performance, service terms and monthly cost in your comparison. Ask which park services a backup connection should carry if the main line fails.
Do we need an access point in every static caravan?
The answer depends on your indoor coverage promise, the construction of the homes and the survey results. Test a representative unit of each type. A separate indoor access point gives you control over placement and a clear test point when a guest reports a fault.
How much does holiday park WiFi installation cost?
Two parks with the same pitch count might have very different costs. Existing ducts, new road crossings, power at cabinet positions and the number of indoor units all change the price. Request separate figures for the shared network, each home connection and ongoing service. Compare totals over the same contract term.
How should we introduce WiFi during the open season?
Start with a small group of homes and agree access with their owners. Use changeover windows for indoor work. Once the trial meets the agreed checks, schedule each remaining row and give reception the handover dates, joining instructions and support contact.